You can lift two wheels on the same side at one time with one jack:
https://photos.google.com/photo/AF1QipMHF88ERLm-1e8UGCBfYY77pOhp8bsXxiQFWg7y
Jacking from the front, both the front and rear wheel will come up and allow you to place jack stands.
https://photos.google.com/photo/AF1QipNE6URfX_CZ84eGQCuogYAyFfW4rz8Kp8OAB2hS
Front Jack point, thick sheet metal with hole (just inside the crimped seam).
WIth 2x4 pad on jack in the front:
https://photos.google.com/photo/AF1QipNC55njW9GAlhR4CLuPNJJ5GUvea2FYVZxnSRwx.
You can then put jack stands under the a-arm pivot or under the plastic shield near where the a-arms attach (use pads for the latter).
Rear jack point is also just inside the body seam crimp:
https://photos.google.com/photo/AF1QipPXSdOqa6z98M6wDcZXMhzGjdwFXugdtIUlv5ij
You can see the jack stand in the same photo under the axle. Alternative place for a rear jack stand would be under the trailing arm pivot or the jack pad.
